APPLE FINAL CUT PRO:

Shot in 720pN at 24fps then brought into final cut the same way. Still a RED LINE?


	Cow Forums : Apple Final Cut Pro << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

Shot in 720pN at 24fps then brought into final cut the same way. Still a RED LINE?
by Michael Pierre on Jul 23, 2006 at 4:36:17 am

I know i'm doing something wrong. Can someone give me the right info? How should I bring 720p/n footage in?

Respond to this post • Return to posts index

Re: Shot in 720pN at 24fps then brought into final cut the same way. Still a RED LINE?
by Jerry Hofmann on Jul 23, 2006 at 1:57:57 pm

As far as I know, you should be using the Easy setup for DVCPRO 720p24. did you?

720p/n creates media files which are natively 24fps... other than that it's the same as removing the pulldown say from tape shot at 720p24.

The sequence setting then should be 23.98fps. Is it?

Jerry

Respond to this post • Return to posts index

Re: Shot in 720pN at 24fps then brought into final cut the same way. Still a RED LINE?
by Michael Pierre on Jul 23, 2006 at 3:15:21 pm

That's what I did . I used easy set up.
I'll try again.
But I've never removed the pulldown. How is that done?

Thank you,
Michael

Respond to this post • Return to posts index

Re: Shot in 720pN at 24fps then brought into final cut the same way. Still a RED LINE?
by gary adcock on Jul 23, 2006 at 3:33:23 pm

[Michael Pierre] "ut I've never removed the pulldown. How is that done?"

there is no pulldown in the 24pN format from the HVX.

if it was shot on Varicam the pulldown should have been removed on ingest if you set proper in and out points on capture.- Using "Capture Now" does not always understand how to remove the redundant frames.

gary adcock
Studio37
HD & Film Consultation
Post and Production Workflows
Chicago, IL

Respond to this post • Return to posts index

Re: Shot in 720pN at 24fps then brought into final cut the same way. Still a RED LINE?
by Jerry Hofmann on Jul 24, 2006 at 7:42:36 pm

Those files already have no pulldown... that's why the p/n designation. You shouldn't need to process them at all.

They should work in DVCPRO100 23.98 sequence. They were shot with a 200 right?

Jerry

Respond to this post • Return to posts index

Re: Shot in 720pN at 24fps then brought into final cut the same way. Still a RED LINE?
by JeremyG on Jul 24, 2006 at 7:11:47 pm

After selecting the proper easy setup, then make sure you MAKE A NEW SEQUENCE. It's very important, otherwise the first sequence in there (sequence 1) has the settings from whatever was left from your last project.

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>