APPLE FINAL CUT PRO:

E-Sata convertor to FW


	Cow Forums : Apple Final Cut Pro << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

E-Sata convertor to FW
by Scott Davis on Aug 24, 2008 at 10:02:17 pm

Does anyone know of a converter from e-sata to FW. I have an external e-sata drive that I want to connect to desktop systems that don't have an e-sata card.

Scott Davis

Respond to this post • Return to posts index

Re: E-Sata convertor to FW
by Steven Gonzales on Aug 24, 2008 at 11:53:14 pm

There is no conversion device that I know of, and I'm not sure if anyone would bother to make one.

Your best bet is to either put an ESata card in the computer, or take the hard drive out of that ESATA only enclosure and put it in an enclosure with firewire.

Here's a good quality, relatively low cost model with both Esata and Firewire:

http://www.wiebetech.com/products/toughtech.php

Respond to this post • Return to posts index

Re: E-Sata convertor to FW
by Zane Barker on Aug 25, 2008 at 1:33:41 am

Well I have seen this http://www.firmtek.com/seritek/seritek-spyder/ but I cannot find a place online to buy one.

Perhaps it is not out yet.

There are no "technical solutions" to your "artistic problems".
Don't let technology get in the way of your creativity!

Respond to this post • Return to posts index

Re: E-Sata convertor to FW
by Zane Barker on Aug 25, 2008 at 3:59:26 am

So there support people just emailed me (only took 2.5 hours on a sunday I am impressed) he said that it will be available in about a month and will be $130.

There are no "technical solutions" to your "artistic problems".
Don't let technology get in the way of your creativity!

Respond to this post • Return to posts index

Re: E-Sata convertor to FW
by Scott Davis on Aug 25, 2008 at 2:18:30 pm

Zane, that is exactly what I was looking for. Many, many thank yous.

Scott Davis

Scott Davis

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>