Revoming elevator/lift ring from audio

first cut out parts where there is the ring but no voice, that is the easy part. parts where the ring is mixed with voice - vegas doesn't deal with that kind of stuff. in izotope you can see the spectrum of your sound, you have to manually cut of the frequencies of the ring. of course some part of human voice claims those frequencies too, so you will either harm your interviewers or will have to leave some traces of the ringing. it must be a compromise. unless the voice is low male one and the ringing is in high frequencies or vice versa but that is probably not the way it is gonna be..

Thanks everybody for information!!!
Best,
Cadu

although spectral layers indeed is very good, i woudn't exagerate with its possibilities so much. this exact problem which we have here deals with removing frequencies. izotope can do it the same way, using visual interface. but you can do it as well in veeery old program called gold wave which is a very good editor for audio. you don't have wand but you can see the spectral analysis as well. it is called bandpass / bandstop there. the problem is in finding what to stop and what to pass and here comes the spectral layers and izotope... :)))