ADVC 1000 problem

	ADVC 1000 problem by Paul Redgrove on Nov 5, 2009 at 8:27:55 am Hi All I've borrowed a colleagues Grass Valley ADVC 1000 to send pictures from my FCP on MacBook Pro via SDI to a broadcast monitor and on. Problem is I can't get anything except noise up on the monitor. I know images are going down the firewire as I tested it with a camera and the ADVC has picked up a signal/stream. Is there some basic procedure I'm failing dismally to adhere to? I don't have a manual but know it works as it has in the past... Cheers Paul Respond to this post   •   Return to posts index

	Re: ADVC 1000 problem by Baz Leffler on Nov 6, 2009 at 12:08:27 am Have you got the ADVC1000 set to DV-SDI? (right hand side button). It should display DV timecode in the display window. Baz What would I do without the 'UNDO' button!!!! Respond to this post   •   Return to posts index

	Re: ADVC 1000 problem by Paul Redgrove on Nov 6, 2009 at 8:11:17 am Hi Baz Yup and it generates a timecode and indicates a stream with audio...infuriating as I know it works! Cheers Paul Paul Redgrove Respond to this post   •   Return to posts index

	Re: ADVC 1000 problem by Baz Leffler on Nov 7, 2009 at 2:35:15 am Paul - I have a MBP and an ADVC1000 in my facilities here. If you haven't sorted it out yet I can hook them up here and see if I can replicate your problem. Just let me know. Baz What would I do without the 'UNDO' button!!!! Respond to this post   •   Return to posts index

	Re: ADVC 1000 problem by Paul Redgrove on Nov 15, 2009 at 1:47:59 pm Hi Baz Never got the damned thing to work. Tried everything. Had it running through firewire onto camera no problem. Thing is my edits suffered form cutting wihtout a monitor and if it's a persistant problem then I'll have to look at other setups...although my desire for a fully functional mobiel FCP with Black Magic, monitor etc etc continues to fall on deaf ears... Cheers Paul Paul Redgrove Respond to this post   •   Return to posts index