Re: installing an SDI card into a PVM monitor by toby Heslop on May 5, 2008 at 10:57:43 pm
Thanks Del,
Yes I know they snap in pretty much, though I can't find where the wires snap into and on which chipboards, the board is mounted, just need to connect the wires
Re: installing an SDI card into a PVM monitor by del chapple on May 5, 2008 at 11:17:26 pm
found this old thread, i dont have any manuals for CRT SDI cards(all of mine are Component with AJA boxes doing the work). Keep digging you might find what you are looking for. The sony option cards though usually come with a small amount of literature that just literally says unscrew this, place coax here and refer to the Manual for operatopnal help.
Re: installing an SDI card into a PVM monitor by toby Heslop on May 5, 2008 at 11:42:56 pm
yeah, I have seen this one before,
they talk about fitting the SDI card into a monitor not designed for the model card,
I have some doco on how to install but it's for a 20inch and I'm trying to install in a 14inch as the card came from a busted 20inch.
the card is mounted correctly in the monitor, I have 2 cable ends from it that need to connect to the monitor,
One is a 6 wire connecter, and the other is a 3 wire connector, but with only one wire in it.
And there is a small external chipboard connected between the wires that I guess should be seated some where
Re: installing an SDI card into a PVM monitor by toby Heslop on Jun 1, 2008 at 11:49:07 pm
I bought the card from Ebay. I'm not sure if the same model fits in your monitor. It would be wise find out first. Then do a search online and you should be able to find someone selling a used card.
