Not able to see iSCSI LUNs after upgrading to ESX 3.5


	Cow Forums : SAN - Storage Area Networks << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

Not able to see iSCSI LUNs after upgrading to ESX 3.5
by irrani dam on Oct 31, 2009 at 12:53:51 am

Hi,

We upgraded one of our ESX server from version 3.0.2 to 3.5. But
after upgrading the ESX server not able to see my iSCSI LUN which are presented from ISCSI SAN.

Environment

Host :ESX Server
SAN : Stonefly Voyager.

Any help much appreciated.

kind regards,
Irrani

Respond to this post • Return to posts index

Re: Not able to see iSCSI LUNs after upgrading to ESX 3.5
by edwards willeam on Nov 7, 2009 at 1:48:04 am

The upgrade process resets the ESX Server firewall to the default settings.
Hi Irrani,

To re-enable the software iSCSI port in the ESX Server firewall:

1. Log in to the ESX host or VirtualCenter using the Virtual Infrastructure Client. If you log in to VirtualCenter, select the ESX host from the Inventory.

2. Click the Configuration tab.

3. Click Security Profile.

4. Click the Properties link.

5. Select Software iSCSI Client.

6. Click OK

kind regards,
Duf

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>