Unable to record PAL MPGs
by Rafael Amador
on
Oct 14, 2009 at 10:53:42 am
I've been trying to capture some SD PAL as MPG, but no way.
I have the NANO connected with the AJA ioHD.
When i feed (SDI) p720 or 1080, no problem to record 19/25/35 MPG.
When I feed PAL I get "No Source".
Any idea/
rafael
Re: Unable to record PAL MPGs by Michael Schell on Oct 14, 2009 at 3:50:58 pm
Hi Rafael-
Try leaving a live source connected to the nanoFlash and then power cycle the nanoFlash. We may have an intermittent issue locking to the SD PAL source.
Please let me know if this works and I'll add this to our bug list.
Re: Unable to record PAL MPGs by Rafael Amador on Oct 15, 2009 at 2:07:00 am
Hi Michael,
After my post I made few more tests.
Is not a PAL/NTSC, but AJAioHD issue.
My NANO don't recognize the SD signal coming from the ioHD weather PAL or NTSC.
No problem with the SD coming from the EX-1.
When I play p720 or 1080 with the AJA TV, the NANO recognize the source.
When I play a PAL or NTSC, the NANO do not refresh the source.
If I power cycle I just get "No Source".
The ioHD is properly connected.
One SDI to the monitor, the other to the NANO. Same output in both SDI.
Rafael
