|
HVR-1500,FCP and Kona-LH
by Arjun Rao
on
May 6, 2008 at 4:11:23 pm
Hello All,
We are trying to digitize frame accurately using the HVR-1500 and we have a few problems:
1. HVR-1500 , We are going out SDI into a Kona LH card and digitizing DV-NTSC.
2. We put window burn on the digitized footage to check for frame accuracy and we found that the digitized footage is offset by a few frames.The problem is that the offset is not uniform.The offset is exacerbated with TC breaks.
Are there any compatibility issues between the HVR-1500 and FCP or Kona LH cards?
I look forward to hearing from the Forum
Sincerely,
Arjun Rao
Respond to this post Return to posts index
| |
