AUTODESK COMBUSTION:

outputing onto broadcast quality monitor


	Cow Forums : Autodesk Combustion << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

outputing onto broadcast quality monitor
by rickyd on Jul 7, 2006 at 4:48:42 pm

Hello

I am looking for a card for a PC that outputs RGB (component) so i can plug a broadcast quality monitor into it for grading, does anyone know of any good cards?

Respond to this post • Return to posts index

Re: outputing onto broadcast quality monitor
by Timor Kardum on Jul 7, 2006 at 4:57:20 pm

decklink, they also have a forum here. even their cheepest card ($300) can output 10bit SDI...(i have one, works perfect!)

hope this helps

timor

www.omgraphix.de
- identity in motion -

Respond to this post • Return to posts index

Re: outputing onto broadcast quality monitor
by Kenneth La Rue on Jul 7, 2006 at 6:41:09 pm

Hi,

While the Decklink card will work you can also use your firewire connection to output to a broadcast monitor. Here is a link to a tips and tricks page that has a QuickTime movie showing exactly how to do it.

http://www.thestreetproductions.com/tips.html

Download the "Framebuffer" video and watch this first and if this does not give you what you want I would also recommend the Decklink card.

Ken LaRue
Autodesk Application Specialist
Combustion / Toxik
Combustion Training DVDs
http://www.thestreetproductions.com

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>