combustion 4 and outputting to a firewire device


	Cow Forums : Autodesk Combustion << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

combustion 4 and outputting to a firewire device
by Dustin on Aug 22, 2005 at 6:55:16 pm

can a viewport in combustion 4 be output via firewire to an analog NTSC source like a broadcast monitor, similar to after effects 6.5?

Respond to this post • Return to posts index

Re: combustion 4 and outputting to a firewire device
by Karim95 on Aug 23, 2005 at 12:11:56 am

Hi there,

Yes a viewport can be Outputed via FireWire but You'll need a FireWire to Analog Converter for that you can use a DV Camcorder with in out DV regarding me i use the Canopus ADVC 100 it's a Bi directional COnverter ... and it works fine

Best Regards

Karim,

Respond to this post • Return to posts index

Re: combustion 4 and outputting to a firewire device
by Dustin on Aug 23, 2005 at 12:14:54 am

I do have an ADVC100...How do I set Combustion to output.

Respond to this post • Return to posts index

Re: combustion 4 and outputting to a firewire device
by gary m. davis on Aug 23, 2005 at 1:43:21 am

firewire to camera, y/c or composite from cam to video monitor

setup in prefs.

//gD

gary m. davis // visualz.com
application training specialist
3ds Max | Combustion | Toxik
"don't key DV!"

Respond to this post • Return to posts index

Re: combustion 4 and outputting to a firewire device
by Dustin on Aug 23, 2005 at 3:08:28 am

i know how to set it up with a tv, I want to know what the preferences set up is, I'm not finding anything about outputting to a firewire device.

Respond to this post • Return to posts index

Re: combustion 4 and outputting to a firewire device
by Karim95 on Aug 23, 2005 at 12:06:57 pm

Hi Again,

Go to File/Preferences Host/FrameBuffer FrameBuffer Type DV (Direct Show) and in the Options select your Device ... DV AVC And you're all set :o)

Quickcapture Can't work while FrameBuffer is on you have to disable FrameBuffer to use QuickCapture

Best Regards

Karim,

Respond to this post • Return to posts index

Re: combustion 4 and outputting to a firewire device
by Jeff Brown on Aug 23, 2005 at 6:38:05 pm

...and I think you need the FW device connected and turned on so C* will see it when it launches.

-jeff

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>