|
| Dual Display config - Nvidia FX 3400
| | | |
Dual Display config - Nvidia FX 3400
by Ben Cheng
on
Jun 22, 2005 at 12:23:02 pm |
Hi
Wonder if anyone here has any experience with setting up combustion for dual display ?
The system config as follow
Dual Xeon + WinXP Pro + Quadro FX 3400 + Dual computer displays + combustion 4 + Decklink - video output disabled + not acting as 3rd computer display
Wonder if the palatte settings should be locked or floating
Facing this issue with combustion only
Any advice is greatly appreciated !
Cheers
Ben Cheng
| | | | |
| | | |  | Re: Dual Display config - Nvidia FX 3400
by Alex Udell on Jun 23, 2005 at 12:01:11 am |
Hi...
Are you experienceing a problem? The post is not clear.
Thx...
Alex Udell
lead demo artist and trainer
PEI Graphic Technology www.profileeast.com
My Reel: http://alexudell.no-ip.biz
COMBUSTION EXCHANGE FTP: ftp://combustionexchange.no-ip
Logon: combustion_user
PW: learn
| | | | |
| | | | Re: Dual Display config - Nvidia FX 3400
by Ben Cheng on Jun 23, 2005 at 8:59:04 am |
Hi Alex
Thanks for your post
The original config was locked & everything was working fine
It was changed to floating & everything was fine
Then we changed to locked, both displays flicker & the software freeze, when we start a new workspace or open an existing workspace
Changed the window config preference from dual window to single in locked mode doesn't help too
If its back to floating, everything works again
Cheers
Ben
| | | | |
| | | | | Re: Dual Display config - Nvidia FX 3400
by Alex Udell on Jun 23, 2005 at 12:49:08 pm |
Hi B...
Try deleting the host.ini file.
This will set yu back to square 1 as if you are opening combustion for the first time...
tthen set as yu like.
Let me know what happens...
Alex Udell
lead demo artist and trainer
PEI Graphic Technology www.profileeast.com
My Reel: http://alexudell.no-ip.biz
COMBUSTION EXCHANGE FTP: ftp://combustionexchange.no-ip
Logon: combustion_user
PW: learn
| | | | |
| | | | Re: Dual Display config - Nvidia FX 3400
by Ben Cheng on Jun 27, 2005 at 4:02:19 am |
Hi Alex
My customer managed to resolved the issue himself
He found out that after switching the combustion window config preference from dual to single
He need to re-launch combustion before changing the palette preference from floating to locked
Everything works fine then
My understanding from the customer is that he can't change both settings the same time
Thanks for your attention & time
Cheers
Ben
| | | | |
|
|
|
