Movie Looks very frequently doesn't work with m2t files in Adobe PP


	Cow Forums : Magic Bullet Suite << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

Movie Looks very frequently doesn't work with m2t files in Adobe PP
by Joe Moya on Sep 13, 2009 at 1:23:20 pm

When I apply Magic Bullet Movie Looks to an m2t HD file (1440x1080 29.97 1.33) sequence on the timeline and open LooksBuilder with the Edit button in the effect controls, the typical sample preview picture does not show. The sample view picture is black.

Sample view in preferences is set to Current Frame.... but, frame is not present and is showing black/blank.

How do I get Looks(i.e., LooksBuilder) to recognize the current frame for an m2t file?

Computer specs.:

WinXP, ASUS W6T6 WS Rev., Intel i7 3.2Ghz 8X32bit CPU, 6G Corsair DDR3 (low lat.) RAM, GeForce GTX 280, Adaptec 5405 RAID SAS controller for 2 Stripes of 2xHD 15k rpm e-sata Fujitsu 300G ea. HD's (total of of 4 HD's in a dual stripe raid setup)

Looks ver. 1.0.1

Side note: Look shows blank/black sample views... but, Movie Look presets work fine.

Respond to this post • Return to posts index

Re: Movie Looks very frequently doesn't work with m2t files in Adobe PP
by Joe Moya on Sep 13, 2009 at 1:42:24 pm

I fixed the problem... I found that version 1.2 update fixed this problem.

Respond to this post • Return to posts index

Re: Movie Looks very frequently doesn't work with m2t files in Adobe PP
by Jeffrey Gould on Sep 21, 2009 at 3:38:33 pm

I just wanted to thank you for posting the fix...I was going crazy, every change took 2-3 minutes to update, plus the black screens as you mentioned. You've saved me hours of work.

Jeffrey S. Gould
Action Media Productions

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>