| will 50 frame recording be possible with the HyperDeck Shuttle 2
• | | | |
 | will 50 frame recording be possible with the HyperDeck Shuttle 2
by pekin azer on Jun 21, 2012 at 7:40:41 pm |
Hi, all i can't seem to record 50 fps off of my fs100 or sony f3 on to my HyperDeck Shuttle 2.
Can that be possible?
Thanks in advance,
Pekin
| | | | |
• | | | |  | Re: will 50 frame recording be possible with the HyperDeck Shuttle 2
by Chris Pearse on Jun 22, 2012 at 1:34:54 am |
Hi Pekin,
I'm afraid that the HyperDeck Shuttle does not support 1080p50/60 formats. The highest frame rate possible is 1080p30.
Chris Pearse
Blackmagic Design
| | | | |
• | | | |  | Re: will 50 frame recording be possible with the HyperDeck Shuttle 2
by Bo Skelmose on Jun 22, 2012 at 9:17:28 am |
It is not very portable but the Hyperdeck studio Pro will do the job.
| | | | |
• | | | |  | Re: will 50 frame recording be possible with the HyperDeck Shuttle 2
by Shaun Roemich on Jun 22, 2012 at 4:07:27 pm |
Considering what your other options are, I'd say the HyperDeck Studio Pro is VERY portable... Just not a top-of-camera solution. 19" wide (nominally), less than two inches high and about three or for inches deep and weighs maybe three pounds with two SSDs in it.
Big Dog - Technical Director - Switcher
Road Dog Media - Vancouver, BC Canada
roaddogmedia@gmail.com
| | | | |
• | | | | | Re: will 50 frame recording be possible with the HyperDeck Shuttle 2
by Bo Skelmose on Jun 30, 2012 at 10:59:50 am |
And it need to be connected to 110-230V power as it cannot work with 12V and on a battery.
| | | | |
• | | | | | Re: will 50 frame recording be possible with the HyperDeck Shuttle 2
by Shaun Roemich on Jun 30, 2012 at 3:23:23 pm |
Input on the unit is looking for 12v. Has anyone tried running it off of a battery yet?
Power supply is a universal power to 12v transformer.
Big Dog - Technical Director - Switcher
Road Dog Media - Vancouver, BC Canada
roaddogmedia@gmail.com
| | | | |
• | | | | | Re: will 50 frame recording be possible with the HyperDeck Shuttle 2
by Bo Skelmose on Jun 30, 2012 at 6:24:46 pm |
I have used the Shuttle on battery without problems. The Hyperdeck studio Pro do not have any 12V input.
| | | | |
• | | | | | Re: will 50 frame recording be possible with the HyperDeck Shuttle 2
by Shaun Roemich on Jun 30, 2012 at 9:11:43 pm |
I see the Pro does not... My bad. The studio does via a coaxial round DC connector.
Big Dog - Technical Director - Switcher
Road Dog Media - Vancouver, BC Canada
roaddogmedia@gmail.com
| | | | |
| |
|
Reply
Like
