UltraScope on Ikan V8000


	Cow Forums : Blackmagic Design << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

UltraScope on Ikan V8000
by sato masashi on Oct 23, 2009 at 7:45:40 pm

I want BM ultrascope.
but,24inch monitor is too big for my desk.
therefore,I want conect ultrascope to ikan V8000.

Is conection as below work good?

"ultrascope DVI-converter-Ikan V8000"

If Ultrascope work on this conection,V8000 is low rezolusion.
Can I miximize only vector scope?

Respond to this post • Return to posts index

Re: UltraScope on Ikan V8000
by Bob Zelin on Oct 23, 2009 at 11:28:41 pm

the answer to all your questions is NO. I urge you to download the manual for the Ultrascope and READ IT, or you will fail miserably.
The Ikan V8000 is a video monitor, it is not a computer monitor with a DVI input. So you cannot use this.

the Ultrascope requires a specific computer, with a specific graphics card for it to work. It requires a DVI computer monitor that will display 1920x1200. And no, you cannot just select one vectorscope display - you see them all, or nothing.

If you don't do everything I told you in this reply, you will spend $660 for an Ultrascope, and nothing will work.

Bob Zelin

Respond to this post • Return to posts index

Re: UltraScope on Ikan V8000
by sato masashi on Oct 25, 2009 at 2:57:34 am

hi,Bob Zelin.
thank you for your reply.

"you cannot just select one vectorscope display - you see them all, or nothing."

thank you.it is the information I want.

"The Ikan V8000 is a video monitor."
yes,it is videomonitor.
threfore,I will test DONW CONVERTER.
DOWN CONVERTER (ex.xpc-4) can convert DVI(1980x1200) to RCA(640x486).
DOWN CONVERTER acts the computer monitor(DVI1980x1200).
I think that I can conect ultrascope to V8000 with DOWN CONVERTER.

but,donw converted disply is ugly.
and,ultrascop is "all display mode only".

I will buy 24inch LCD monitor. thank you.

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>