FORUMS:

HDLink Pro 3D lut


	Cow Forums : Blackmagic Design << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

HDLink Pro 3D lut
by Martin B. Wehding on Feb 29, 2008 at 9:53:43 pm

Hi
Has anyone had any luck with loading a 3d lut into the HDLink Pro?
I tried to generat a Iridas .itx lut and autodesk .3dl files with cineCube but none of them works. It gives me a "wrong format" error. The itx file is not even recognized.
I also tried to download Steves 3dl files from digitalpraxis.net. But they did'nt work as well.
Is there some experience out there?

reg.
Martin

Martin Wehding

Postproduction manager

Fridthjof Film A/S

Copenhagen

Denmark

Respond to this post • Return to posts index

Re: HDLink Pro 3D lut
by Margus Voll on Mar 1, 2008 at 12:15:20 pm

Hi.

Do a search on that. It was talked here not so long time ago.

--

Margus

http://iconstudios.eu

Respond to this post • Return to posts index

Re: HDLink Pro 3D lut
by Martin B. Wehding on Mar 1, 2008 at 5:01:01 pm

I know, i started the first thread about 3d luts and HD link Pro.
But as far as i can see, no one has given us a answer about the autodesk 3d luts not being recongnized by the HD link Pro.
Steve wrote that his lut should work, but i can't make them work. So i'm curious if anyone made the work?

reg
Martin

Martin Wehding

Postproduction manager

Fridthjof Film A/S

Copenhagen

Denmark

Respond to this post • Return to posts index

Re: HDLink Pro 3D lut
by Kristian Lam on Mar 3, 2008 at 11:38:24 pm

Hi Martin,

I've successfully sent some test drivers out to some of the other members here with the same issue. However, I'm having trouble locating your email address and your website is not loading.

There are basically some discrepancies between the specification we've got for the 3dl files and what is being generated out there, causing some 3dl files not to load. We have fixed this and it will be available in a HDLink driver update I expect to be out really soon.

regards

Kristian Lam
Blackmagic Design

Respond to this post • Return to posts index

Re: HDLink Pro 3D lut
by Martin B. Wehding on Mar 3, 2008 at 11:52:33 pm

Hi Kristian
Thanks for your feedback.
I Sent your support a mail a couple og hours ago.
I would love to try your test drivers!
I just updated my profile sp now there is a more up to date address for our web.

thanks
Martin
www.f-film.com

Martin Wehding

Postproduction manager

Fridthjof Film A/S

Copenhagen

Denmark

Respond to this post • Return to posts index

Re: HDLink Pro 3D lut
by Steve Shaw on Mar 21, 2008 at 12:32:36 pm

I've been in discussion with Black Magic, and they did have an 'error' in their accepted format.

Thye have released an update, and the 3D Luts that my Builder generates now work correctly!

The first to go this route, and prove the update works, are Warner Bros. Thanks George!

Hope this helps.

Steve

Respond to this post • Return to posts index

Re: HDLink Pro 3D lut
by Martin B. Wehding on Mar 21, 2008 at 1:15:38 pm

Thanks Steve. I recieved a beta version from Kristian and got it up and running.

martin

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>