Creative COW SIGN IN :: SPONSORS :: ADVERTISING :: ABOUT US :: CONTACT US
Creative COW's LinkedIn GroupCreative COW's Facebook PageCreative COW on TwitterCreative COW's Google+ PageCreative COW on YouTube
FORUMS:listlist (w/ descriptions)archivetagssearchhall of famerecent posts

Decklink driver 5.2 drop frames

COW Forums : Blackmagic Design

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Share on Facebook
CuttlefishDecklink driver 5.2 drop frames
by on Nov 3, 2005 at 1:15:30 am

Hi all,

I am using a Decklink HD Pro capture card with a RAID0 array to capture 1080i 30 fps. I am using 8 bits. When I ran the Decklink speed test, I get about 150 MB/s for the write and 40 fps for the mode I described. My problem is that when I capture longer than 30 seconds, the decklink card will drop about 50% of the frames. I think the problem is the raid drive can't catch up with the capture, but Speed test tells me otherwise. Has anyone else seen this problem?


Return to posts index
Reply   Like  

Matt DowlingRe: Decklink driver 5.2 drop frames
by on Nov 3, 2005 at 11:08:33 pm

Hi,

150MB/sec for 1080/60 is nowhere near adequate. Our speed disk test is there as a guide, not an absolute. You need to have some overhead - around 20%. for any RAID setup. For 1080/60 a RAID running around 200-220MB/sec would be a good solution.

Cheers,

Regards,

Matt
Blackmagic Design


Return to posts index
Reply   Like  

CuttlefishRe: Decklink driver 5.2 drop frames
by on Nov 4, 2005 at 2:14:06 am

Matt,

Thanks for the reply. I forgot (not purposely) to mention that using the 4.4b10 drivers the system has no problem capturing at all. I know a lot has changed since 4.4 days, but do you know any change that might have caused this.


Return to posts index
Reply   Like  


Matt DowlingRe: Decklink driver 5.2 drop frames
by on Nov 4, 2005 at 2:24:59 am

To be honest 4.4 is over a year ago, so much has changed since then that i would have no idea why 4.4 worked and 5.2.2 doesn't. There has been so many improvements in regards to features and stability since then, i would not recommend running 4.4. There has been a lot of OS changes since then to. That would be the first thing i would look at.

Regards,

Matt
Blackmagic Design


Return to posts index
Reply   Like  

Kaspar KallasRe: Decklink driver 5.2 drop frames
by on Nov 4, 2005 at 9:18:43 am

Make sure you do not have more adio channels than you need. If you are on that critical level removing the audio might help.

-Kaspar


Return to posts index
Reply   Like  

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Share on Facebook


FORUMSTUTORIALSMAGAZINESTOCKYARDVIDEOSPODCASTSEVENTSSERVICESNEWSLETTERNEWSBLOGS

Creative COW LinkedIn Group Creative COW Facebook Page Creative COW on Twitter
© 2013 CreativeCOW.net All rights are reserved. - Privacy Policy

[Top]