Decklink Extreme and 4 Channel Audio Output


	Cow Forums : Blackmagic Design << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

Decklink Extreme and 4 Channel Audio Output
by Matt on Jul 21, 2005 at 2:40:08 pm

Hello, I was wondering if anyone had any advice on a 4-channel audio output solution. Here is what I was thinking, and I was curious if this is possible...In FCP 5.0 if I use a Decklink Extreme Card can I output 4 channels of audio via SDI to a Digital Betacam (DVW-500) in a single pass, or do I have to do this in two passes?

If anyone has any advice it would be greatly apprechiated, thanks.

Cheers
Matt

Respond to this post • Return to posts index

Re: Decklink Extreme and 4 Channel Audio Output
by jason levy on Jul 21, 2005 at 6:36:38 pm

Yes, you can do it in one pass. You only have to set up the two extra outputs in FCP in your sequence settings. Works nice.

jason

Respond to this post • Return to posts index

Re: Decklink Extreme and 4 Channel Audio Output
by nico on Jul 22, 2005 at 10:24:18 am

you can do it also 8 channels in one pass (embedded sdi audio) - analogue audio only 2 channels...

Respond to this post • Return to posts index

Re: Decklink Extreme and 4 Channel Audio Output
by Olivier Jean on Jul 23, 2005 at 5:06:09 am

Hi,

select your sequence, command 0 to bring up
your sequence settings, click on the audio outputs tab
and add 2 extra audio track either as stereo or dual mono
and you're done.

Regards
Olivier Jean
Powermedia Systems
Sydney Australia

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>