Creative COW SIGN IN :: SPONSORS :: ADVERTISING :: ABOUT US :: CONTACT US :: FAQ
Creative COW's LinkedIn GroupCreative COW's Facebook PageCreative COW on TwitterCreative COW's Google+ PageCreative COW on YouTube
FORUMS:listlist (w/ descriptions)archivetagssearchhall of famerecent posts

Studio Videohub

COW Tag
COW Tags : Blackmagic Design
Re: Studio Videohub - Can someone confirm the routing of the outputs
by Shaun Roemich on Dec 4, 2011 at 5:08:34 pm
in the Blackmagic Design Forum
Again Bob, thanks. I was under the impression that one could "log in" to the router to make changes and then disconnect the computer (possibly a laptop in my application) and that the network connection to the control computer doesn't need to be
Re: Studio Videohub - Can someone confirm the routing of the outputs
by Bob Zelin on Dec 4, 2011 at 4:52:04 pm
in the Blackmagic Design Forum
hi shaun, yes - I install Blackmagic routers on a regular basis, and this is from my first hand experience, not just reading the manual. I usually use a cheap bare bones Mac Mini to control the router. These routers will not work "stand alone" -
Re: Studio Videohub - Can someone confirm the routing of the outputs
by Shaun Roemich on Dec 3, 2011 at 7:47:47 pm
in the Blackmagic Design Forum
Once again, MUCH appreciated! Probably order mine in January when I have money again!
Re: Studio Videohub - Can someone confirm the routing of the outputs
by David Chai on Dec 3, 2011 at 6:46:42 am
in the Blackmagic Design Forum
Yes, it is 16x32. Having used both video hub studio and broadcast videohub which has 72x144 - worked flawlessly for almost a year now.
Re: Studio Videohub - Can someone confirm the routing of the outputs
by Shaun Roemich on Dec 2, 2011 at 10:25:17 pm
in the Blackmagic Design Forum
Thanks Bob. I ASSUME you are verifying this by actually having used the device and not just on literature? I'll be ordering mine sight unseen so I NEED to make sure I get this right.
Re: Studio Videohub - Can someone confirm the routing of the outputs
by Bob Zelin on Dec 2, 2011 at 4:31:25 am
in the Blackmagic Design Forum
this is a true 16x32 router. You can assign any of the 16 inputs to any of the 32 outputs independently. Output 1 and Output 17 (the "matching pair" for the first group) are completely independent of each other and you can assign anything you want
Re: Studio Videohub - Can someone confirm the routing of the outputs
by Sam Cole on Dec 2, 2011 at 12:38:32 am
in the Blackmagic Design Forum
it is 16 input and 32 output. The design is based on having eg 16 rooms that each feed the router and 2 feeds back to each room as 1 for input to the NLE and 1 for the room monitor.
Studio Videohub - Can someone confirm the routing of the outputs
by Shaun Roemich on Dec 1, 2011 at 11:56:15 pm
in the Blackmagic Design Forum
The Studio Videohub until very recently was marketed as 16 x 32 router but is now being marketed as a 16 input, 32 output router. Can I assume that the outputs are not INDIVIDUALLY routable and in fact route in pairs? So more like a 16 x 16 x 2
Re: Videohub problems
by Bob Zelin on Jan 4, 2011 at 10:37:45 pm
in the Blackmagic Design Forum
Replies below, and Shane - describe your system - are you using a MAC or PC as a server, and are your clients MAC or PC ? We have just, for the second time, replaced our faithful Studio Videohub with a Broadcast Videohub and, for the second t
Videohub problems
by Shane Betts on Jan 3, 2011 at 1:52:49 am
in the Blackmagic Design Forum
Hi all We have just, for the second time, replaced our faithful Studio Videohub with a Broadcast Videohub and, for the second time, are having no luck whatsoever. The first one just would not be recognised by the server and we sent it back. After
Re: Any users of studiohub out there?
by Christopher Lowden on Jun 29, 2010 at 9:35:53 pm
in the Blackmagic Design Forum
Hello I have been running 2 studio videohub for 2 years in a live TV show. They have each locked up once. The videohub is excellent value for money but I would not consider it as reliable as more expensive alternatives. I would not install it is as
Re: Can I Join Two Studio Videohub's Together?
by Kristian Lam on May 24, 2010 at 12:19:13 pm
in the Blackmagic Design Forum
Hi, If you are thinking of doubling up the routes, then you'll really need 4 units to get the full matrix, however, if you're thinking of sending signals from one router to another rough some creative routing, that's still possible. regards Kri
Re: Can I Join Two Studio Videohub's Together?
by Jack Jones on May 22, 2010 at 3:50:26 pm
in the Blackmagic Design Forum
Alternatively... Is it possible to do the following; On Channel 1 is Edit 1 and Monitor 1 On Channel 2 is Edit 2 and Monitor 2 Is it possible to do Monitor 2 takes Edit 1*???? *Possibly by doing Mon 2 takes SDI Out from Channel 1 Any hel
Can I Join Two Studio Videohub's Together?
by Jack Jones on May 22, 2010 at 3:24:44 pm
in the Blackmagic Design Forum
Hi, I'm in the process of designing our new machine room and the cabling infrastructure to go with it. I started up a design based around a 32 channel patch hub, which is pretty much all we currently need, plus and extra 4 spare slots. I'm plan
News: Blackmagic Design’s 2K SDI Format has been Adopted for Real Time Capture and Playback in Full
by Cow News Droid on Apr 16, 2010 at 8:39:19 pm
in the NEWS: Product News Releases Forum
(NAB Las Vegas--April 16, 2010) Blackmagic Design announced full compatibility with the new Sony “HDCAM-SR” SRW-5800/2 deck for capture and playback in native 2K. Real time 2K capture and playback was shown on the Blackmagic Design NAB 2010 booth
Re: Christmas wish list for Ultrascope
by Bjarki Gudjonsson on Jan 5, 2010 at 11:52:22 pm
in the Blackmagic Design Forum
[Shane Betts] "I'd like to add my vote for 1920x1080 output so I can send the scopes around the house via HDSDI (via a Studio Videohub of course). " Good call. Also since a lot of monitors are now running that resolution instead of 1920x1200. 16:9
Re: Christmas wish list for Ultrascope
by Shane Betts on Dec 28, 2009 at 7:09:53 am
in the Blackmagic Design Forum
I'd like to add my vote for 1920x1080 output so I can send the scopes around the house via HDSDI (via a Studio Videohub of course). Cheers Bettsy
problem getting stable video out of VideoHub
by Eric Hansen on Dec 19, 2009 at 9:55:07 pm
in the Blackmagic Design Forum
hey all i also sent this to BMD Support. i'm currently using version 4.2 on a Studio VideoHub: a few things: 1. i've hooked up a AJA Gen10 sync to inputs 13 and 14. Input 13 is a 23.98psf HD signal and Input 14 is a 29.97 SD signal. when i t
Re: Studio VideoHub
by Joshua Helling on Nov 10, 2009 at 8:02:07 pm
in the Blackmagic Design Forum
So...All the outputs (whether they are "for monitoring" or not) are independent crosslinks and are individually routable. In other words Output 1 does not have to contain the same rout as Output 73 (for monitoring). Sincerely, Joshua Direc
Re: Studio VideoHub
by Bob Zelin on Nov 10, 2009 at 4:56:18 am
in the Blackmagic Design Forum
In Orlando what else would you like to know ? Bob Zelin
Re: Studio VideoHub
by Eric Harnden on Nov 9, 2009 at 7:35:02 am
in the Blackmagic Design Forum
Are you doing the work in FL or CA? If in CA, maybe we can meet up and talk about this?
Re: Studio VideoHub
by Bob Zelin on Nov 8, 2009 at 3:47:57 pm
in the Blackmagic Design Forum
Hi Eric - I am currently installing a Broadcast videohub for Disney Broadcast Operations. The input and output of the edit system are HD-SDI in each edit room. They come out of an AJA or Blackmagic card, and go in and out of the router. In addit
Studio VideoHub
by Eric Harnden on Nov 6, 2009 at 11:14:22 pm
in the Blackmagic Design Forum
According to the blackmagic-design Videohub page: "Independent Monitoring "Because most editors love monitoring direct from the router, Videohub has up to 144 independent SDI outputs totally dedicated for monitoring. Independent monitoring outp
News: Blackmagic Design Announces New Low Price for Studio Videohub Routers
by Cow News Droid on Sep 11, 2009 at 9:44:51 pm
in the NEWS: Product News Releases Forum
New low price for Studio Videohub 16 x 32 SDI router with 3 Gb/s SDI support 16 x 16 RS-422 control, automatic auto switch and full SDI re-clocking makes professional routing more affordable (Amsterdam-IBC, The Netherlands--September 11, 2009) Bla
News: Blackmagic Design Announces New Low Price for Studio Videohub Routers
by Cow News Droid on Sep 11, 2009 at 9:44:51 pm
in the Blackmagic Design Forum
VideoHub and RS422
by Eric Hansen on Aug 19, 2009 at 12:22:33 am
in the Blackmagic Design Forum
i'm about to pre-wire a facility that's going to use the Studio VideoHub. Is there a limit to the length of RS422 cable? we will have HDCAM SR, HDCAM and other decks that will sit in a rack along with the VideoHub. and then use Mac Pros with AJA Kona
Re: Kona 3 and sony J30SDI
by Bob Zelin on Jul 13, 2009 at 4:25:38 pm
in the AJA Kona - Mac Forum
Tony - I will answer your questions, but HOW DARE YOU ask Blackmagic questions on an AJA Forum. Blackmagic has their own forum on Creative Cow. You initiallly made this into an AJA problem, and now it became a Blackmagic problem. Why would you as
Re: Ultra scope
by Luke Maslen on Apr 21, 2009 at 5:42:48 am
in the Blackmagic Design Forum
Hey Shane! 'Good to hear you're still asking the tricky questions! UltraScope is so new that I don't think there has been time for any discussion of running multiple UltraScope cards in the one PC. I'll raise the question when the engineers ret
News: Blackmagic Design Announces New Videohub Routers
by Cow News Droid on Apr 20, 2009 at 10:03:33 pm
in the NEWS: Product News Releases Forum
(NAB Las Vegas, Nevada--April 20, 2009) Blackmagic Design Inc. today announced 2 new models of their award winning Videohub routers. At NAB 2008, Blackmagic Design shocked the television industry with Broadcast Videohub, the world’s largest affordabl
Forums

Blackmagic Design Forum


Related Tags

Blackmagic Design
Blackmagic Design ATEM 1 M/E Production Switcher
Blackmagic Design ATEM 2 M/E Production Switcher
Blackmagic Design ATEM Production Studio 4K
Blackmagic Design ATEM Studio Converter
Blackmagic Design ATEM Studio Converter 2
Blackmagic Design Audio Monitor
Blackmagic Design Battery Converters
Blackmagic Design Compact Videohub
Blackmagic Design DeckLink 4K Extreme
Blackmagic Design DeckLink Mini Monitor
Blackmagic Design DeckLink Mini Recorder
Blackmagic Design DeckLink Studio 4K
Blackmagic Design Desktop Video 9.0
Blackmagic Design Desktop Video 9.5
Blackmagic Design HyperDeck Shuttle
Blackmagic Design HyperDeck Software
Blackmagic Design Intensity Extreme
Blackmagic Design Intensity Shuttle
Blackmagic Design Mini Converter
Blackmagic Design Production Camera
Blackmagic Design Smart Videohub
Blackmagic Design SmartScope Duo
Blackmagic Design SmartView HD
Blackmagic Design Studio Camera
Blackmagic Design Teranex 2D
Blackmagic Design Teranex 3D
Blackmagic Design UltraStudio 3D
Blackmagic Design UltraStudio 4K
Blackmagic Design UltraStudio Mini Recorder
Blackmagic Design Universal Videohub 3
Blackmagic Design URSA
Blackmagic Design Videohub Master Control
Broadcast Videohub
DeckLink
Decklink HD Extreme
DVI Extender
Enterprise Videohub
HDLink
Intensity
Mini Converter
Multibridge
OpenGear Converters
Studio Videohub
UltraScope


FORUMSTUTORIALSFEATURESVIDEOSPODCASTSEVENTSSERVICESNEWSLETTERNEWSBLOGS

Creative COW LinkedIn Group Creative COW Facebook Page Creative COW on Twitter
© 2014 CreativeCOW.net All rights are reserved. - Privacy Policy

[Top]