Schneider
COW Tag
| | | | Re: if you understand colour - why?
by Jeremy Garchow on May 14, 2012 at 4:32:25 pm
in the Apple FCPX Techniques Forum
[Geoff Addis] "The EX1 sensor is sensitive to the low infra-red region of the colour spectrum and you need to use an appropriate filter in front of the lens. Both B+W and Schneider make such filters. Tungsten lighting is usually quite rich in infra-r | | | | |
| | | | Re: if you understand colour - why?
by Geoff Addis on May 14, 2012 at 10:50:52 am
in the Apple FCPX Techniques Forum
The EX1 sensor is sensitive to the low infra-red region of the colour spectrum and you need to use an appropriate filter in front of the lens. Both B+W and Schneider make such filters. Tungsten lighting is usually quite rich in infra-red!
Hope t | | | | |
| | | | Article: NAB 2012: Schneider Optics
by Debra Kaufman on May 3, 2012 at 11:52:51 pm
in the COW - Tutorials Forum
Cinematography NAB 2012: Schneider Optics Lens and filter designer/manufacturer Schneider Optics introduced a range of new products at NAB 2012, including the 77m True-Match Vari-ND thread-In filter; iPro Lens System for iPhone 4/4S; S2000 Century/ | | | | |
| | | | NAB 2012: Schneider Optics
by Debra Kaufman on May 3, 2012 at 4:52:51 pm
in the Cinematography Forum
Lens and filter designer/manufacturer Schneider Optics introduced a range of new products at NAB 2012, including the 77m True-Match Vari-ND thread-In filter; iPro Lens System for iPhone 4/4S; S2000 Century/Canon 17mm T4 Tilt-Focus Lens in PL Mount; a | | | | |
| | | | Sony Vegas shuts down while editing
by Conny Schneider on Apr 27, 2012 at 12:56:37 pm
in the Sony Vegas Forum
Sony Vegas 10 shuts down showing a message 'the program does not reply anymore' while editing as soon as I add more than 2 clips including audio. Can somebody help me out? | | | | |
| | | | gspeed q not showing up in Disk utility
by David Schneider on Apr 16, 2012 at 8:01:19 pm
in the G-Tech Forum
Hi Gene,
I have 2 Gspeed ES units (my previous post incorrectly said espro, I'm sorry about that) with a PCIe RAID controller card (purchased from G-tech). They both show up fine.
I need to reformat one of them (as well as just needing more stor | | | | |
| | | | Re: Locked SD cards
by Lee Schneider on Mar 15, 2012 at 6:18:45 pm
in the Sony XDCAM - EX & Related Forum
Sorry for wasting everyones time, but thanks for the replies. Turns out I didn't do a good job of isolating the problem during my first tests, but when I did them again, I narrowed it down to one of the Hoodman card reader/adapters. One adapter wor | | | | |
| | | | Re: Locked SD cards
by Lee Schneider on Mar 13, 2012 at 11:49:30 pm
in the Sony XDCAM - EX & Related Forum
No... they aren't locked. I've checked them and tried them with the slider in both positions. I have a Hoodman RAW card, and a couple of SanDisk Extreme Pro cards. It's REALLY odd that they worked fine for a short while after the firmware upgrade | | | | |
| | | | Locked SD cards
by Lee Schneider on Mar 13, 2012 at 2:37:06 pm
in the Sony XDCAM - EX & Related Forum
I updated my 2 Ex1's firmware to 1.2, and everything worked fine for about 2 weeks. Now for some reason, the SD cards I've been using in the Hoodman adapters show they are locked/protected. I've tried 3 different cards, in 2 adapters, in 2 differen | | | | |
| | | | EX1r over exposure with 1.8x convertor
by Damo Jones on Mar 5, 2012 at 2:09:31 am
in the Sony XDCAM - EX & Related Forum
Hi guys,
I use an ex1r, and i recently brought a Schneider 1.8x convertor. I used it recently and whilst i got some good image quality, alot seemed to be over exposed. I shoot surfing, so i shoot at 2000 shutter speed, with auto aris on. As i was | | | | |
| | | | Archived Drivers
by Lee Schneider on Mar 2, 2012 at 7:15:20 pm
in the Blackmagic Design Forum
I'm having a nightmare trying to find the archived drivers for the Intensity Pro on BlackMagic's web site. Can anyone point me to them??
Thanks! Lee | | | | |
| | | | Service: Aspectroma
by Giorgio Ariu on Feb 28, 2012 at 7:30:57 am
in the COW - Services Forum
After 10 years experience of lab technical video work I used to work several years for the local major broadcasters on a wide range of local programmes including sports, actuality, entertainment, commercials, promos and corporate as Cameraman, Edito | | | | |
| | | | Aspectroma
by Giorgio Ariu on Feb 27, 2012 at 11:30:57 pm
in the Forum
01/11/2005 MEDIASAT TRANSMISIONES, S.L. - Spain Shootings for RTM Maroc in Rome Edificio Imagina Gaspar Fabregas, 81 08950 Esplugues de Llobregat (Barcelona) SPAIN 01/04/2006 TV 2 AS - Norway Bondevik (Prime Minister of Norway) meets Italian Att. Oey | | | | |
| | | | Re: New HyperDeck 2.5 Beta software available now.
by Lee Schneider on Feb 19, 2012 at 5:47:51 pm
in the Blackmagic Design Forum
The DNxHD QuickTime is a nightmare in Final Cut and completely unusable. Any effect or even just a fade to black causes you to render. And there is a big gama shift from when the playhead is still to when playback is started. Maybe it's just me, but | | | | |
| | | | Re: On Set Dialogue Mics
by Lee Schneider on Feb 18, 2012 at 11:52:09 pm
in the Audio Professionals Forum
Thanks for the reply Ty. Let me tell you what I'm doing and then I'd love some input from you. Unfortunately I know it's going to be, "your going to need more mics." LOL I'm a video producer and do mostly documentary type work. The mic will be used | | | | |
| | | | Re: On Set Dialogue Mics
by Lee Schneider on Feb 18, 2012 at 9:38:52 pm
in the Audio Professionals Forum
Since we're on the topic of shotgun mics, I'm going to be in the market for a decent one soon. I don't want to break the bank, but do want to get something good. What would be recommended in the $1,000 ish price range? I'm using an AT 897 now.
T | | | | |
| | | | Re: New HyperDeck 2.5 Beta software available now.
by Lee Schneider on Feb 18, 2012 at 7:37:30 pm
in the Blackmagic Design Forum
Juan, or anyone who's updated to 2.5. Would you be willing to upload a short (15 seconds or so) DNxHD QuickTime clip to me so I can toss it into FCP, add some filters, etc and see how it all works out? My direct email is leevideo1@yahoo.com if some | | | | |
| | | | Re: New HyperDeck 2.5 Beta software available now.
by Lee Schneider on Feb 18, 2012 at 5:43:34 pm
in the Blackmagic Design Forum
Andreas,
I'm with you on this. I'm still on FCP 7, and when it comes to the point where I need to make a change, I'm going to seriously look at all platforms. The good thing is that 7 is going to be just fine for awhile, so I'll be able to watch h | | | | |
| | | | Re: New HyperDeck 2.5 Beta software available now.
by Lee Schneider on Feb 17, 2012 at 6:13:57 pm
in the Blackmagic Design Forum
Great timing. I've been looking around for ways to work with DNxHD in Final Cut Pro, but it looks like the codec in a Quicktime .mov wrapper should work. Can you confirm that this has been tested with Final Cut and runs well? Also, based on the DNxHD | | | | |
| | | | Re: HyperDeck Shuttle/DNxHD
by Lee Schneider on Feb 17, 2012 at 5:34:08 pm
in the Apple Final Cut Pro Forum
I just saw on the BMagic forum (looked there after posting this) that there is 2.5 beta software update available where the HyperDecks will write the DNxHD codec in a QTime wrapper. It said you will be able to import that into most all QuickTime pro | | | | |
|
|
| |
|
