| | | | Too Many KP's
by Michael Harrington on Nov 21, 2009 at 10:04:36 pm
in the Apple Final Cut Pro Forum
Not much action on the OSX forum so thought I'd try here, especially since the KP's have increased.
I've had this computer for 6 months and up till now it's run flawless, handled a massive FCP ProRes, 5TB storage including SataMax combined with FW | | | | |
| | | | Crashes on Renders etc. with XDCAM EX footage
by Martin Phillips on Nov 21, 2009 at 3:53:38 pm
in the Apple Final Cut Pro Forum
I know that this has been covered before, but I am running out of time and patience with the system here!
Have recently upgraded to 8 core MacPro with Kona LHi and Firmtek RAID. Hardly ever had crashes on the old G5 despite it struggling with the | | | | |
| | | | Re: New Snow Leopard P2 Drivers
by Martin Jordan on Nov 21, 2009 at 2:19:31 pm
in the Panasonic HVX - HPX (P2) Forum
Yeah I have seen that same info.
Duo has no plans for supporting snow.
Dual Core, 3GHz, OS 10.5.6, 16GB Ram, 2 TB internal HD, ATI Radeon X1900 Graphics Card, 4TB External Raid, FCP Studio 7, AE 9.0.2, Squeeze for the Web, MacBook Pro (MBP) 2.6 G | | | | |
| | | | Re: kernal panic
by Zane Barker on Nov 21, 2009 at 7:10:55 am
in the Apple OS X Forum
[Michael Harrington] "After the first kernal panic earlier today I ran disc warrior"
it is a absolute MUST to make sure that your version of Disk Warrior is up to date if you plan on using it with Snow Leopard.
If you use an old version of DW o | | | | |
| | | | Re: Copy P2 cards during a shooting
by Michael Sacci on Nov 20, 2009 at 10:50:40 pm
in the Panasonic HVX - HPX (P2) Forum
the solution is all over the forum, card readers, but the one from Panasonic is $2K if you are shooting a lot a must. Sonnet is coming out with a express34 solution for a grand. Then there is the dying duel adapter for $120 but it doesn't work with s | | | | |
| | | | kernal panic
by Michael Harrington on Nov 20, 2009 at 9:39:24 pm
in the Apple OS X Forum
I guess I WAS one of the lucky ones, been using MAC since the days before my MAC SE20, more recently G4 then G5 and have never had a kernal panic till now. I'm now on a, see specs below, and have had 3 kernal panics, 2 just now as I attempt to load S | | | | |
| | | | Re: Import Error from SXS card
by Tom Laughlin on Nov 20, 2009 at 9:33:25 pm
in the Sony EX Series XDCAM Forum
Ok, so Craig, questions, here's my problem, for a while I have several BPAV folders either not import, or it takes multiple attempts to make sure they copy all the way. Ones that do import, I've got several that are not giving me clean video. I get a | | | | |
| | | | Re: Convert DVD (Video_TS files) to quicktime
by Vald Lewis on Nov 20, 2009 at 8:22:33 pm
in the Apple Final Cut Pro Forum
Thanks for this posting.
Love getting a straight and worthwhile answer. Googled the question (convert VIDEO_TS file to quicktime) and got your forum.
Square 5 seems a really useful program and also the site had great instructions posted on how t | | | | |
| | | | Re: Duel Adapter Drivers
by Chris Cardno on Nov 20, 2009 at 3:05:34 pm
in the Panasonic HVX - HPX (P2) Forum
Dave, I just saw your question after responding to a similar one further up the board -- Duel apparently stated that they are not going to support Snow Leopard and have no intention of doing so in the future. I'm afraid you'll have to find another w | | | | |
| | | | Re: New Snow Leopard P2 Drivers
by Chris Cardno on Nov 20, 2009 at 3:03:03 pm
in the Panasonic HVX - HPX (P2) Forum
I saw reference to this on a couple of forums shortly after Snow Leopard was released but I don't have first-hand confirmation: Duel apparently stated that they will not support Snow Leopard AT ALL. They are not working on drivers and will not be do | | | | |
| | | | Help with trying to go HD, emphasis on key matte
by Mark Warren on Nov 20, 2009 at 12:51:52 am
in the AJA io Forum
Hello,
My name is Mark Warren and I am getting ready to make the jump from an SD workflow to an SD workflow...and I could use some advice.
My budget is approx. $10,000 and I need to get:
a. HD Camera (I'm looking at cameras such as Panasoni | | | | |
| | | | Mpeg Streamclip - multiple conversions
by Alberto Mendez on Nov 19, 2009 at 10:22:49 pm
in the Compression techniques Forum
Operating System = Mac - Snow Leopard
Conversion Software = MPEG Streamclip 1.9.2
Source Codec (DVD files)
Destination Codec = Highest Resolution Video and Audio that doesn't need to render in FCP
Type of Destination Use = Create Demo Reel in FCP | | | | |
| | | | Re: Premiere Pro alternatives
by Scott Sheriff on Nov 19, 2009 at 9:26:48 pm
in the Art of the Edit Forum
Maarten
Some thoughts on Mac Pro running Final Cut.
I came to NLE's from the CMX online world, with casual experience in Avid and Media 100. When I decided to buy my own system, I wasn't biased one way or another, but needed to get the most bang | | | | |
| | | | Re: Snow Leopard, P2 and FCS 2
by Nelson May on Nov 19, 2009 at 9:21:04 pm
in the Panasonic HVX - HPX (P2) Forum
I would have to look up the receipt, but I got a FW 800/USB/ESATA enclosure for about 80 bucks. When I went to SN and wanted to do a clean install, so I bought a 500GB HD and put it in the MBP and moved my 320 to the enclosure. It comes with a power | | | | |
| | | | Re: New Snow Leopard P2 Drivers
by Jeremy Garchow on Nov 19, 2009 at 9:02:10 pm
in the Panasonic HVX - HPX (P2) Forum
[Terry Jun] "
Any place that has it cheaper?"
Not that I know of. If you shoot a lot of P2, the PCD20 will make up the money in time lost transferring cards in one shoot or two. The PCD20 is a 5 card reader as is supported by Panasonic, the due | | | | |
| | | | Re: Snow Leopard, P2 and FCS 2
by Terry Jun on Nov 19, 2009 at 8:56:41 pm
in the Panasonic HVX - HPX (P2) Forum
Just wanted to let you guys know that I did not have to load the drivers to access the files from the camera via firewire in SL. I just needed the drivers to try to make it work on the DuelAdapter. But having an external FW800 with Leopard fixes that | | | | |
| | | | Re: Snow Leopard, P2 and FCS 2
by James Meagher on Nov 19, 2009 at 8:53:43 pm
in the Panasonic HVX - HPX (P2) Forum
I downloaded some P2 Snow Leopard drivers from here earlier today:
https://eww.pavc.panasonic.co.jp/pro-av/support/cs/csregistp2m/ep2main/macp2driver_e.htm
I've downloaded the contents of my P2 card by firewire from my HVX200 in PC MODE (1394 D | | | | |
| | | | exporting on quicktime 10
by Dan Newton on Nov 19, 2009 at 8:52:09 pm
in the Apple OS X Forum
Hey
I have a little problem --- i just got a new mac with the operating system ( snow leopard )
now this comes with the new QUICKTIME ---
but my problem is ---- I can't export anything --- there is no export option ---
can someone please | | | | |
| | | | Re: Snow Leopard, P2 and FCS 2
by Nelson May on Nov 19, 2009 at 8:50:46 pm
in the Panasonic HVX - HPX (P2) Forum
Here is my work around. I have leopard installed as a boot disk on a partitioned FW800 drive with FCP2. I just start up leopard, ingest my P2 data, and save. I take the drive, to my powermac, copy the whole folder or just open (if I am doing only DV | | | | |
| | | | Re: Snow Leopard, P2 and FCS 2
by Terry Jun on Nov 19, 2009 at 8:06:31 pm
in the Panasonic HVX - HPX (P2) Forum
I just got an email from the Panasonic that the new drivers are up. I tried it and it does not seem to be working yet. I may have to go back to leopard. Don't know if it's SL and the Card or just the driver. | | | | |
| | | | Final Cut Pro to compressor with cluster problem
by Jean Deraps on Nov 19, 2009 at 6:35:26 pm
in the Apple Final Cut Pro Forum
Up until recently I've been having no problems doing the following. In the qmaster control panel I set up "Quck cluster with services" and set the compressor service to use 6 or 7 cores. From Final Cut Pro i send the clip to Compressor and render usi | | | | |
| | | | Re: FS-100 / P2 & Snow Leopard
by Bob Tompkins on Nov 19, 2009 at 3:43:38 pm
in the Panasonic HVX - HPX (P2) Forum
I just recently completed a P2 download into FCP7 on a MacBook Pro with Snow Leopard 10.6.2. I downloaded from the 170 camera. It worked fine. Are you having a FireStore problem or a P2 problem? Did you check with FireStore support for drivers? | | | | |
| | | | Re: Snow Leopard, P2 and FCS 2
by James Meagher on Nov 19, 2009 at 3:23:31 pm
in the Panasonic HVX - HPX (P2) Forum
Hello,
I'm wondering if anyone has any new information on these compatibility issues since this conversation happened over two months ago. I'd love to know if the parties involved have sorted the DuelAdapter/P2/Snow Leopard workflow/compatibility | | | | |
| | | | AJA I/O HD on my MacPro LAG!!
by Jamie Baker on Nov 19, 2009 at 2:55:16 pm
in the AJA io Forum
I am having an issue where when I have the AJA IOHD running my internal and external hard drives lag when I go to open them the first time after system boot. Also, when in FCP if I leave the machine idle for a min. or so I get a 30-1min beach ball an | | | | |
| | | | Re: How to get sharpest 170 picture?
by Bob Tompkins on Nov 19, 2009 at 2:14:34 pm
in the Panasonic HVX - HPX (P2) Forum
Eric, (now that you have been brutally humbled) shooting with the 170 is not rocket science. I just borrowed one for a demo and was able to shoot, download, edit and output a beautiful video to H.264. I am using a MacBook Pro with Snow Leopard and FC | | | | |
| | | | New Snow Leopard P2 Drivers
by Arthur Aldrich on Nov 19, 2009 at 11:45:51 am
in the Panasonic HVX - HPX (P2) Forum
From Panasonic:
A driver package compatible with the Mac OS 10.6 is now available.
[The package contains]
- IEEE1394b driver for AJ-PCD20 series
- PCI Express (PCIe) driver for AJ-PCD35 series
- P2 card formatter for Mac
A P2 driver | | | | |
| | | | Viewing MOVs without FCP
by Neil Parr-Davies on Nov 19, 2009 at 10:14:33 am
in the Apple Final Cut Pro basics Forum
Hi All,
We have two macs running FCP7 and ingesting footage from Sony XD Cams, F350/F330. On a separate mac in the production office, I'd like to be able to view the ingested rushes but can't play the movs in Quicktime - presumably because they ar | | | | |
| | | | Re: XDCAM-FCP7-Snow Leopard-New MacPro
by Andy Mees on Nov 19, 2009 at 8:21:13 am
in the Apple Final Cut Pro Forum
An OS X 10.6 (Snow Leopard) compatible version of XDCAM Transfer has now been released :
http://forums.creativecow.net/readpost/142/868154
XDCAM Transfer for Snow Leopard Now Available.
by Daniel Goyette on Nov 19, 2009 at 2:54:47 pm
This mes | | | | |
| | | | XDCAM Transfer for Snow Leopard Now Available.
by Daniel Goyette on Nov 19, 2009 at 6:54:47 am
in the Sony EX Series XDCAM Forum
This message from Sony reach me tonight :
New version of XDCAM Transfer 2.11 is now posted to our support site this version supports new features of new XDCAM EX products and as well for XDCAM EX ONLY it will work under Apple Snow Leopard - Unfort | | | | |
| | | | EX3 .mp4 cannot be opened on Mac
by Avery Munger on Nov 19, 2009 at 2:26:18 am
in the Sony EX Series XDCAM Forum
I have some footage provided to me on a WD USB Passport hard drive that was shot by a crew on the Sony EX3. They were offloading the SxS cards onto the hard drive at the end of the day to free up space for the next day. From my understanding they ju | | | | |
| | | | FCP displaying colors warm on DVCPRO HD footage
by Eriq Wities on Nov 19, 2009 at 1:55:53 am
in the Apple Final Cut Pro Forum
Footage in my FCP 6.04 is looking really warm in the viewer and the canvas. I know these aren't supposed to be accurate for monitoring color, but they've always been pretty close before. I'm bringing up the original capture scratch in QT and compar | | | | |
| | | | Re: MPEG 1 Nightmare
by Mark Block on Nov 19, 2009 at 1:27:33 am
in the Compression techniques Forum
Last year I spent al day trying to make this work. It didn't.
I successfully edited the text file, and 640x480 appeared in Compressor as my custom-built MPEG-1 size, but when I ran Compressor the resulting file still came out 320x240. Weird. I jus | | | | |
| | | | Apple Final Cut Pro | Upgrade your FCP Machine to Leopard...Safely!
You know you want to install OS X Leopard as soon as you can. For your production machine, though, you probably also know that you should wait. You also know that you're probably going to do it anyway. Whether you do it at the right or wrong time, there's a right way to do it. Creative COW Leader Shane Ross tells you how.
Editorial, Feature
Author: Shane Ross |
| | | | |
| | | | Nuke | Nuke - An Introduction for After Effects Users
Nuke, the new compositing tool from The Foundry, is rapidly becoming a favorite in high-end film production. Its price also offers an easy entry for indie producers who want to create better work, faster and more powerfully. This guided tour of Nuke for AE users, along with tips for leveraging your AE experience in the brave Nuke world of VFX creation will help you discover Nuke.
Review, Tutorial
Author: Pete O'Connell |
| | | | |
| | | | Apple DVD Studio Pro | Mac Subtitling Software Round-up:
The COW's man in Nepal, Jiggy Gaton, gets asked all the time about subtitling DVDs -- and cringes every time: editing software suites just don't have that much to offer. However, Mac DVD authors have some standalone alternatives worth considering.
Review, Feature
Author: Jiggy Gaton |
| | | | |
Podcasts | | | | creative cow podcast
Episode #080 - June 15, 2009
History of 3D Movies with Ray Zone, ILM does Nuke, Apple Snow Leopard, Swift 3D v6, Acrobat.com ends beta, Music2Hues, iPhone 3G S shoots video, updated Macbooks and more creative news and interviews - creativecow.net | | | | |
|
|
