Creative COW SIGN IN :: SPONSORS :: ADVERTISING :: ABOUT US :: CONTACT US
Creative COW's LinkedIn GroupCreative COW's Facebook PageCreative COW on TwitterCreative COW's Google+ PageCreative COW on YouTube
AJA:AJA io ForumAJA Kona ForumAJA Xena ForumAJA io TutorialsAJA Kona TutorialsAJA Xena TutorialsAJA

Kona monitoring problems during capture

COW Forums : AJA Kona - Mac

VIEW ALL   •   ADD A NEW POST   •   PRINT
Share on Facebook
Respond to this post   •   Return to posts index   •   Read entire thread


GlobeRiderKona monitoring problems during capture
by on Dec 1, 2005 at 11:50:09 pm

Im running a Kona2 with HD-SDI going back and forth to my deck and the 2nd HD-SDI output of the card going to my broadcast monitor. I also have a Plasma monitor hooked up to the component outputs of the Kona2 card. In the past I have always been able to see a clear picture during logging and capture. For some reason this stopped working and now I can only see a skewed and garbled image on both monitors when the log and capture window is open and the tape is rolling. Everything still captures fine though...and plays back from the viewer or timeline ok too.

If I unplug the HD-SDI signal going TO the deck, from the card, the problem clears up and everything monitors good during capture.

I am not using any sort of external reference, although I wasnt in the past when it was working fine.

My Kona2 control panel is set to :freerun.

Any suggestions?







Posts IndexRead Thread
Reply   Like  
Share on Facebook


Current Message Thread:




LOGIN TO REPLY



FORUMSTUTORIALSMAGAZINESTOCKYARDVIDEOSPODCASTSEVENTSSERVICESNEWSLETTERNEWSBLOGS

Creative COW LinkedIn Group Creative COW Facebook Page Creative COW on Twitter
© 2013 CreativeCOW.net All rights are reserved. - Privacy Policy

[Top]