Kona 2 Update v6.0 Problems

I Posted This In the Kona Room also


so here's the skinny, I updated the Kona 2 drivers to the new kona 6.0 and now i'm all messed up. just to start on the right foot this is not a new install of kona and the firmware update did happen.

I can select an NTSC easy setup for lets say DVCPRO 50 and as i enter the capture tool my kona card flips to PAL audio still passes though.

my first though is the same you are all having, I picked the wrong setup, NOPE i did the opposite selected a PAL setup and suddenly i can see the video , audio is gone of course.

So my next try is to dig into the setting and try to fix it from capturing at 625 to 525. the only way I have been able to do this is to save as a custom pref then re-adjust.

now the problem is that i can see the video in the capture, but as soon as i capture - both batch and capture now. I get a green bar in the bottom of the screen, and as soon as it is finished the file shows no video. in it's place is a green screen, but the audio is perfect.

I think i'm loosing it.
system info
OS X 10.4.11
dual 2.7ghz power PC G5
4GB Ram
FCP Studio 2.o Current update