Here are two BEC Wireless Receiver Holders. more commonly known as “BEC boxes” and a side plate extension for Bauer mounts.
They attach to all cameras with the Sony screw configuration that is most commonly found on the NP/1 battery holder, the IDX NP/1battery system and the Anton Bauer Gold Mount system.
Pro shooters have used them for years to hold their wireless receivers on their cameras. The boxes are made with lightweight plate aluminum and are lined with felt to protect the receiver.
These boxes were made for the Lectro UCR190 receivers (discontinued). The inside dimensions are 5 inches long, 2 3/4 inches wide, and 1 1/8 inches deep.
If your receiver is no larger, and not much smaller, it should fit nicely (If you're in or near NYC, you're welcome to come by my place, a few blocks from 96/B'way, with your receiver to check the fit).
BEC now has many other mounting options for the boxes.
I've had these for a while, but they saw little use and are in very good condition (see actual pics below).
NYC's large photo/video store sells similarly-sized BEC boxes for $75. The side plate goes for $45.
You can buy
one box here for
$45. My asking price for the
side plate is
$25. For
both boxes (they can be ganged together if you use two receivers at the same time), the price is
$80. For
all three pieces, $100.
Cash and carry from my place, or I will gladly ship, for additional charges and a PayPal prepayment.
