Hello Anna and welcome to the Cow Audio Forum.
Knowing the current status of your transmitter and receiver would be helpful.
It's difficult to know how to fix something when I don't know how it's broken.
The transmitter and receiver menus are fairly easy to navigate. Open the face, hit the On/Off button to turn the transmitter or receiver on. Hit the SET button to bring up the menus. Use the two-way toggle button on the face of the unit to scroll to the setting you need to adjust.
Unless you can figure out what got changed, I suggest you toggle the button to RESET and hit the SET button. Toggle from NO to OK. Hit the SET button. The screen will turn blank for a few seconds and then come back on showing the main panel. You may have to adjust the transmit and receive frequencies, but you'll be starting with a clean slate.
Future adjustments are made the same way. Use the SET button to get you into the menus. Use the toggle button to get to the right choice. Use The SET button to confirm the choice. Then toggle to EXIT to get home.
If you SKYPE, I'm tyford. I will be near the computer for a while this afternoon and will leave skype on.
Um, in addition, please find andread the manual.
Regards,
Ty Ford
Want better production audio?:
Ty Ford's Audio Bootcamp Field Guide
