Re: Time code question

[Steve Cassidy] "I really need to know if I can PREVENT the Ki Pro from jumping into record when it sees incoming moving time code. I want to feed the Ki Pro continuous timecode from an external generator, while being able to control the start, stop, and record functions using just the front panel "transport" buttons. "

Yes. Like I said, it's an option. You can turn it on or off.

[Steve Cassidy] "(we'll be using it in a small helicopter...no room for a laptop or other devices) "

Even a handheld wifi device (like a cell phone) will be fine, but don't know how that would go with the FAA.


[Steve Cassidy] " If I'm feeding the Ki Pro time-of-day timecode all the time, will the front panel show me timecode only when I'm recording, or is it just going to continuously display what's coming in from the external generator ? "

If you are displaying tc, then it's probably going to show you whatever it's getting fed (like a deck). If it's free run, you will see free run tc. The big red button will show you if you are recording or not.


[Steve Cassidy] "And also, what kind of indication does the Ki Pro give you regarding remaining record time on the hard drive module ? "

There's a percentage meter has to how much is left.

Jeremy