Hi,
I have a XENA LH with KL-box and have to capture from analog source (Beta SP). While the image is perfect on the screen that is directly connected to the SP-Deck, the image in Machina and on the KL-box-screen has some gray horizontal bars on (see jpg). These bars change with the motion of the image; when the person moves his head down and up, the bars roll down and up.
I hav two stills:
1 taken from xena analog capture an
2 from analog capture with a dv-deck.
1 -
http://www.totho.de/xena/xena.jpg
2 -
http://www.totho.de/xena/dv.jpg
I have also tryed different cables and even used the i/o-cables that came with the xena card instead of the kl-box, but nothing changed.
And using a different analog source does not help it too.
My config is:
- Tyan S2676 Board
- 2x Xeon 3,2 GHz with HT
- 2 GB RAM
- ATI firegl V5100
- some additional controller cards for SATA or firewire800
Can somebody help?
normann
