Re: IO Express HDMI out not working properly

Thanks for your reply Gary, yes I have set the HDMI preference to RGB and tried both, Full Range and SMPTE in the drop box next to it, sorry I don't recall how this preference is called.

I have tried this with red footage converted to prores, straight red footage in color and also a generated gradient in nuke which is allways RGB, and in all programs with the same result.

The HdLink always converts to rgb, and the only prefrence is for using true progressive intead of PFs, and I'm aware this is not the prefered way to do it, The HDLINK downsamples to 8bit, as dvi is only 8bit, that's why I bougth the IoExpress, to use HDMI 1.3 straight of the IOExpress, going trough SDI and the HDLink was only a way to test if the problem was with all of the Aja outputs ore only with HDMI.

Before, I was using sdi out of a multibrige pro with the hdlink going to the dreamcolor via dvi, and it was working just fine, besides being 8bits of course, and thats the reason that I went to the aja, to use the 10bits out of the HDMI 1.3 as i said above.

I doubt it has anything to do with the cables, I have tried a couple, so I'm quite lost as what is causing the problem.

Thanks a lot for your help

Jorge