Re: mxo stopped working

to verify: How does the sys display represent primary vs. secondary....eg., does the icon on the right of my screen represent the port on the right side looking at the back of my mac?

I noticed in that window it also says you can drag the boxes to reposition. You can also move the white menu menu bar on the icon. Right now, the menu bar is on the right icon. The ACD in on the proprietary ADC (on Rt. looking at the back of G5).

Re: settings: Seq.Settings Window: Frame sz.=HD (1440 x 1080) ( 16 x 9), px aspect HD 1440 x1080), Upper, 29.97, QT Vid/Compressor = Apple ProRes 422 (advanced=top field first,interlaced, Audio 48 kHz 16bit Stereo Downmix.

AV Settings:Seq =Apple ProRes 422 1920 x 1080, 60i 48 kHz, capture= HDV-Apple ProRes 422, Device Control= Sony HDV FireWire, Video Playback= MXO HDV 1080i 29.97 - YUV (1440 x 1080), Audio Playback = Note: left on Default because no setting there for MXO, only other choice is built in audio.

In fcp "view video playback"= mxo hdv 1080i 29.97 - yuv (1440x1080), audio= default (no mxo choice).

View all frames give notice "specified hardward not found,check your cam connection"

Next, I'll do the test as a different user.

PowerPC G5 DP2.3, 4GB DDR SDRAM, ATI X800XT, OSX.4.11, QT 7.5.5, FCStudio2, FCP 6.0.5 Sonnet 5 Bay SATA (RAID or JBOD as needed), ACD 23" & Sony NTSC Monitor via Matrox v.1
Sony ZIU hdv, edit w.ProRes