Re: Now I'm posting again... sorry. Shooting an event

You don't say how far from the mixing board your recorder or your camcorder will be. If the audio cable running to the recorder from the audio mixing board has to be a long one, then send audio thru it using line level impedance. If the cable distance is short, mic level should be fine. Mic level over longer cable runs can introduce extraneous noise more easily than line level. Be sure to use quality, grounded, XLR cables for the audio runs, and don't let the audio cable lay right alongside a power cable: if they have to cross, make them cross at 90-degree angles. Don't leave loops of audio cable laying over on top of power cables.