All,
I'm capturing 10-bit from my UVW-1800 onto my array.
The problem is that the video is kinda noisy; at times, it flickers or turns b/w in certain spots of the frame
check it here:
http://red-army.net/video.jpg
could it be my drums in the 1800 that need cleaning? or could it be my configuration somewhere on the Kona?
i haven't cleaned the drums in about 5/6 months and never had this when i was capturing alot of 8-bit....
Specs:
kona SD
Dual g4
700Mb RAM
FCP 3.0.2
help?