Re: Clarity Image VariSpeed Controller

Andrew,

The factory set shutter positions accessed from the shutter switch in the film user menu are all shutter angles (180 degrees 90 degrees etc.). To maintain a constant exposure during a ramp you need to set the shutter to a specific exposure time (1/100 second or 1/60 second would be best).
Go to engineering menus page 2
Shutter select
Change position 1, 2, 3, 4, 5, or 6 to either 1/100 or 1/60.
exit the menu

Now your shutter switch will let you access that fixed exposure time you have selected, and you can avoid exposure changes during a ramp.


Mike Bergeron
Camera Engineer
Panasonic Broadcast